CARF Rebel MAX - Build Thread
The following users liked this post:
AEROSHELDON (10-05-2023)
#333
Senior Member
So did you check your deflection of your flaps should be 55 degrees.
I had mine balance with landing fuel at the front of the wing tube and nose was very bouncy on grass after landing.
You can slow it down so much as even drag the tail on the runway.
I had mine balance with landing fuel at the front of the wing tube and nose was very bouncy on grass after landing.
You can slow it down so much as even drag the tail on the runway.
#335
Senior Member
Were is your balance point with landing fuel?
Mine right in middle, at the back of wing tube with 1.5 liters of landing fuel in the tank, that in the middle of Carfs suggested CG point!
You can move forward 20mm or back or 20mm behind the tube . Flyers choice.
Mine right in middle, at the back of wing tube with 1.5 liters of landing fuel in the tank, that in the middle of Carfs suggested CG point!
You can move forward 20mm or back or 20mm behind the tube . Flyers choice.
Last edited by Skunkwrks; 10-06-2023 at 08:43 PM.
#337
Senior Member
What's that method ? kinda of like having the wings off and trying to balance on the wing tube.
So you want more weight to the REAR....?
So you want more weight to the REAR....?
#339
My Feedback: (39)
With proper gyro settings the Max still flies super stable and lands at walking pace.
The following users liked this post:
AEROSHELDON (10-09-2023)
The following users liked this post:
AEROSHELDON (10-10-2023)
The following users liked this post:
GeorgiaFlyer (04-28-2024)
#344
I am building one, all the surfaces are done and finishing the tail end. Debating to paint the inside or not as I always like pretty inside. Have a Jetcat 220 RXI for it. Looking forward to flying it. Slooowww🤣
Behzad
Behzad
#345
I built a very light 700ml mobile smoke system for my rebel max. Installed or removed in 30 seconds. Together with the flare system it's a nice feature! Peter
Last edited by Schiefsko; 05-04-2024 at 10:54 PM.
The following 5 users liked this post by Schiefsko:
AEROSHELDON (05-05-2024),
Canadian Man (05-06-2024),
CobraJet (05-05-2024),
Dansy (05-05-2024),
yeahbaby (05-05-2024)
#347
Last edited by Schiefsko; 05-05-2024 at 10:09 AM.
The following users liked this post:
smcharg (05-06-2024)