Welcome to Club SAITO !
My Feedback: (6)
Who's design is that? It reminds me of the Ken Willard Sunday Fighter Bristolspadport I built! I still need to paint the pilot and add his scarf.
Senior Member
That is exactly where Mark at OSMW got his idea it's mentioned in the description: Good catch, thanks, Dave
https://www.oldschoolmodels.com/sfb.htm
PS, does that color have a name, Thanks again, it's getting an FA 40-a
FA 40-a, all up weight.
https://www.oldschoolmodels.com/sfb.htm
PS, does that color have a name, Thanks again, it's getting an FA 40-a
FA 40-a, all up weight.
Last edited by 1200SportsterRider; 05-31-2024 at 09:29 AM.
My Feedback: (6)
A beautiful engine, it should work fantastic! Which color in particular did you want the name of?
That is an OS .10 FP sitting in the Bristolspadport. I built my first Bristolspadport when Willard wrote his article for American Aircraft Modeler, bought the plans, and used Ace constant cord foam wings. Article can be found here: https://www.airplanesandrockets.com/...march-1974.htm
P.S. I have a half built Heinschmitt too with a snarling Snoopy for it. He'll get a mustache and point for his helmet. I was tempted to buy OSM's Heinschmitt but the wife will kill me if I bring another kit home.
That is an OS .10 FP sitting in the Bristolspadport. I built my first Bristolspadport when Willard wrote his article for American Aircraft Modeler, bought the plans, and used Ace constant cord foam wings. Article can be found here: https://www.airplanesandrockets.com/...march-1974.htm
P.S. I have a half built Heinschmitt too with a snarling Snoopy for it. He'll get a mustache and point for his helmet. I was tempted to buy OSM's Heinschmitt but the wife will kill me if I bring another kit home.
Last edited by FlyerInOKC; 05-31-2024 at 09:59 AM.
My Feedback: (6)
Mine is Olive Drab Ultracote. I cover the front nose piece with True Red to imitate some of the British WWI aircraft. The roundlets and tri color rudder are vinyl decals from Callie Graphics. She did the Pink N Poke graphics too.
Last edited by FlyerInOKC; 05-31-2024 at 10:28 AM.
Senior Member
This is Olive Green by MacGregors, it's maybe a little too dark.
Too dark?
.This is from Ali Express
From Ali Express
Too dark?
.This is from Ali Express
From Ali Express
Last edited by 1200SportsterRider; Yesterday at 02:23 AM. Reason: Add content
Senior Member
- Thread Size: 1/4 Inch
- Thread Pitch: 32 inch
- Seat Type: Gasket
- Resistor: No
- Reach: 0.25″(6.25 mm)
- Hex Size: 5/16″(8 mm)
- GASOLINE Gap: 0.02″ (0.5 mm) CH Recommended
- Glow Gap: 0.012″ (0.3 mm) CH Recommended
CHI Rim fire
The following users liked this post:
Jesse Open (Yesterday)
My Feedback: (6)
The still make Ultracote! Now that I think about it it maybe the ParkLite version of Ultracote, Weight: 1.07 ounces per square yard (36 grams per square meter). I bought two Olive Drab and Two Red for the Heinschmitt at the same time.
Them glow Champions are zero gap plugs
Spark plug gaps are pretty important for sure.
https://www.freshhandyman.com/stihl-chainsaw-spark-plug-gap/
Spark plug gaps are pretty important for sure.
https://www.freshhandyman.com/stihl-chainsaw-spark-plug-gap/
Last edited by Jesse Open; Yesterday at 06:48 PM.